5.5kw Booster Pump for Textile Industry

5.5kw Booster Pump for Textile Industry

Pump description:  

Product ZJ CZPT Booster Pump, also identified as a Roots pump, is a volumetric pump.It employs a pair of rotors, identical and in 8-determine with particular clearance amongst them in the pump housing, rotating at the same velocity in reverse instructions to perform operate of suction and discharge of gasoline. The two rotors are supported by rolling bearings in the stop covers of the pump, rotating at large speed and are retained at a set relative situation by a pair of timing gears. The finish clearance amongst rotors and stop handles are fastened by adjustable steel shims amongst the bearing housings and the stop go over at the mounted conclude, which guarantees one particular-direction growth of the rotor when temperature rises during its operation.

4 sets of inner seals (also acknowledged as piston ring) in the two end covers stop lube oil entering into the pump housing. The shaft seal at the entrance-end protect, also referred to as as framework oil seal or shaft seal, stops leakage of air into the pump housing.

In order to decrease temperature of the pump, all designs of pumps (count on the two smallest versions) are equipped with a gearbox cooler and front-stop protect cooler.

Power is transmitted by means of a coupling or V-belt from the motor to the driving shaft of the pump and then through synchronizing gears to the driven shaft


   Model Suction potential         (L/S)

Limit vacuum




Motor Electrical power


Inlet Dia.


Outlet Dia.




Advisable backing pump(model)
   ZJ-70          70      6×10-two   2780         one.five     80      50      87       2X-8
  ZJB-70      5×10-two      100
  ZJ-150A          150      6×10-two   2900          3     one hundred      100      198       2X-15
  ZJB-150      5×10-two      215
  ZJ-three hundred          300      6×10-2   1450          4/5.five     one hundred fifty       a hundred and fifty      490       2X-30A
  ZJB-three hundred      5×10-two      480
  ZJ-600          600      6×10-2   2900         five.5/seven.five     150       150      490       2X-70A
  ZJB-600      5×10-2      503
  ZJ-1200A         1200      6×10-two    1450          11      300       three hundred     1550       2X-70A  (2sets)
  ZJB-1200      5×10-two      250       250     1580

The main  advantage  of Roots  vacuum pump  is that  it can  operate  with high  pumping speed under  lower suction  pressures, nevertheless,  has to  be backed by  a backing  pump.Under  standard operating situations, it is  permissible to not add  by-move pipes.Roots vacuum pump should not work with a higher-pressure  big difference than allowable,otherwise  overheating   and overload  will   cause  damage   of  Roots   vacuum  pump.
As a result, correct backing pump and necessary security units must be deemed.Oil sealed mechanical  pump is typically picked as   the fore   vacuum   pump.  Other   types   of backing   pumps   may   be   used   where    their requirement for supreme vacuum is not too  rigorous. Particularly, when gas  pumped containing large amount of  vapor, drinking water-ring vacuum pump  maybe   an  ideal   option  though   ultimate  vacuum achieved is on the minimal side.

Solution screen:


  1. Regular export polywooden cases.

  2. CZPT packaging can be offered.


CZPT strategy Notice
Specific Doorway to door, quite handy, don’t need customs clearance or choose-up.
By air Airport to airport, you need to have to do the customs clearance and decide up the goods at your nearby airport.
By sea Port to port and you require to do the customs clearance and pick-up the goods at your nearby port.

Our solutions:

Pre-Product sales Service

  1. Give 24-hour reply.

  2. Supply ideal types according to clients’ needs.

  3. Provide detailed item technical specs and reasonal rates. 

In-Revenue Service

  1. Supervise complete production time. 

  2. Provide product’s screening efficiency curve to consumers.

  3. Provide inspection pictures to customers after we end generation.

Right after-Product sales Service

  1. Supply installation guide.

  2. Underneath appropriate installation, normal upkeep and using,we assure one-calendar year warranty.

  3. If solution has malfunction,we’ll reply you within 24 hour and supply resolution or even send out technical personnel to spot right after obtaining upkeep notification.


one.  Q: Are you a manufacturer or investing organization?

    A: We are producer of vacuum pumps and water pumps in China since 1986.

2.  Q: What is your MOQ?

    A: One set is okay.

3.  Q: What is your payments terms?

    A: T/T, CZPT CZPT……

4.  Q: What certificates do you have?

    A: CE, ISO 9001 ….

five.  Q: How about the warranty?

    A: 12 months warranty since shipping and delivery.

6.  Q: What is the supply time?

    A: For different models,distinct motor specs and diverse material,shipping time is diverse,make sure you double validate with our product sales staff.

7.  Q: Can you do OEM model?

    A: Sure, welcome.

eight.  Q: CZPT reputable?

    A: We have entire tests system managed by micro-device,tests functionality curve can be despatched to customers prior to prepare supply.

Company overview:
Proven in 1986, our company has been concentrating on the improvement and manufacture of vacuum pumps and h2o pumps.We are a extensive pump firm integrating production, income and soon after-sales servicing providers.

The primary merchandise include liquid ring vacuum pumpsrotary vane vacuum pumpsroots vacuum pumpcentrifugal water pump and CZPT vacuum pump program,which are widely employed in all varieties of plastic extrusion linemedical and pharmaceutical industry(autoclave sterilizer/capsule filling and sealing device)foods-connected business(beverage device/milking device/sugar plant)chemical industrypower plantcoal mine etc.

Speak to us:


5.5kw Booster Pump for Textile Industry