Solution description:
GFM powder filler is a new merchandise developed and developed by our manufacturing unit in blend with the characteristic of actual filling with reference to the advantages of its counterparts at residence and abroad. Powder is quickly absorbed into the cylinder to be filled by vacuum jet current. It is geared up with T3806 excess weight exhibit of substantial precision and MP-T printer. The filling is automated and quantitative. The residual dust on the filter is cleared by use of the negative stress produced by vacuum. As it integrates electronics, electrical unit and machinery into 1 entity, labor depth is lowered and work setting enhanced. It is characterised by small quantity, light weight, lower energy use, straightforward motion, simple operation and longer services life. So it is specifically suited for powder filling of fire extinguisher and also best for other powder filling sector.
| Hearth extinguisher filling device | |
| Kind | Product |
| Powder filling machine | GFM8-two,GFM16-one,GFM16-1A,GFM16-1B |
| Co2 filling machine | GTM-B,GTM-D,DGTM-C |
| H2o filling equipment | GFM |
| Nitrogen gas filling machine | MDG-one.7 |
Hearth extinguisher filling device photographs and specialized parameters information:
1.GFM8-2 computerized fire extinguisher energy filling equipment
Technical specs:
Total size: 1130X520X1350mm Bodyweight:200Kg
Voltage:380V or 220V 50Hz Electrical power:.55Kw
Filling precision: 1kg<=±0.02
Filling pace:six-12Kg/min
2.GFM16-A semi automatic fire extinguisher electrical power filling machine
Specs:
General size:350X800X1200mm Bodyweight:110Kg
Voltage:380V or 220V Electricity:one.1KW
Filling velocity: 5kg /min
Filling precision: 1kg<=±0.02
three.GTM-C fire extinguisher CO2 filling device
Requirements:
A. This machine want not be heated or cooled, and CO2 can be straight loaded into the fireplace extinguisher kind the huge steel cylinder
B. The CZPT strain in the CO2 metal can is 3~5Mpa and the filling stress is six~10Mpa.
C. The filling speed: 1~6Kg/min.
D. Voltage: 380V&220V
E. Power: two.7KW.
F: A german plunger pump inside it
4.NDG1.seven fire extinguisher nitrogen filling machine
Specs:
Overall size: 585X500X1000mm
Fat:30Kg
Voltage:220V
Power:100w
Filling force:1.7Mpa
fireplace extinguisher powder filler edge:
one. CZPT cleaning: Push the button only, the filler will cleanse thoroughly of alone.
2. Filling repeatedly: Following loaded a fireplace extinguisher, the work need to have not restart the powder outlet, in five CZPTs (this time can be adjusted by person), powder will circulation out automatically.
3. Anti-corrode: CZPT powder storage cylinder.
4. Two fashion powder outlet: Powder outlet one# can make filling perform considerably easy, it avoids to squander time on goal the powder outlet to hearth extinguisher cylinder inlet.
5. Powder recycles purpose.
fire extinguisher powder filler Characteristic:
one. CZPT management whole procedure:
Sucking powder from warehouse or other fire extinguisher, automatic filling, cease and cleansing of filter.
two. Accuracy:
The filler is equipped with T3806 electronic scale of fantastic precision, constituting the controller with electric factors. Whether or not you fill a modest cylinder of . five kg or a large extinguisher of 35 kg, all you have to do is just to set up the bodyweight to be filled on the digital scale. When the set-up fat is filled, the equipment will stop of itself
three. Quickness:
More than 8kg for each minute.
twenty five-3- CZPTs for 4kg hearth extinguisher
forty five-fifty CZPTs for 8kg fire extinguisher
Filling assortment: Earlier mentioned . 5kg
4. Economy
Only one particular employee is required to finish whole filling motion, cylinder motion.
five. CZPT Cleaning
The filler capabilities to thoroughly clean routinely. It will cleanse after after filling one particular extinguisher without the use of guide cleansing filter. An automated swap for cleaning is mounted individually. For cleansing you have to push the button only and the filler will clear thoroughly of itself.
6. Pollution–free
The filler is positioned in the filling shop even though the powder is stored in the warehouse, separating the powder supply from the workshop and fully steering clear of the air pollution by dust. Making use of the filler, powder can be smoothly filled into the fireplace extinguisher.
Automated filling devices for the dry chemical fireplace extinguishers is a new solution produced and created by our factory in mixture with the attribute of actual filling with reference to the advantages of its counterparts at home and overseas. Powder is rapidly absorbed into the cylinder to be filled by vacuum jet recent. It is outfitted with T3806 fat screen of large precision and MP-T printer. The filling is automated and quantitative. The residual dust on the filter is cleared by use of the damaging pressure created by vacuum. As it integrates electronics, electrical gadget and equipment into a single entity, labor depth is lowered and function setting improved. It is characterized by little volume, mild fat, lower energy intake, effortless motion, basic operation and for a longer time provider life.