Curing Agent Pump Gear Mtering Pump

Curing Agent Pump Gear Mtering Pump

M series special pump

Mostly used in the processing for chemical qualities lively, effortless to crystallization and liquid with sturdy capability .


  1. With special seal composition, pertinence and reliable sealing.
  2. Avoid crystal keeping shaft and pump being struck by antifouling spiral groove on the floor of rotor.
  3. Basic framework, easy to dismounting and clear.
  4. Substantial hardness and great dress in resistance.
  5. The design and style of coronary root diminished material shear in pump and improved the utilization fee of vitality use.

Pump info
CZPT:Structural steel,Instrument metal.
Thieving:Compound seal.
Installation:motor and footing installations.
Pressure:one-70bar(relying on viscosity)
Viscosity:Up to 10000Cps
Temperature:-eighteen~200ºC(Describe it just before selection if the temperature is above 90ºC)

Common application:
The casting market: pipe resin
CZPT: polyurethane isocyanate (TDI, MDI)
Viscose industry: curing agent

Functionality parameter table 

kind Solitary rotation displacement(cc/rev) Rated stream rate at highest velocity(L/min) Greatest speed
Inlet/outlet dimension
MS79 .79 .7 980 G3/8″
MS110 one.10 one. 980 G3/eight”
MS158 1.fifty eight one.five 980 G1/two”
MS253 two.53 two.4 980 G1/2″
MS348 3.forty eight three.four 980 G1/2″
MS475 four.75 four.six 980 G1/2″
MS712 seven.twelve six.nine 980 G1/2″
MM950 nine.fifty 9.three 980 G1/2″
MM142 14.2 10.two 720 G1/2″
MM214 21.four fifteen.four 720 G3/four”
MM320 32. 23. 720 G1″

Observe: The earlier mentioned parameters are measured when the pressure is 0 bar

if you have any issue, remember to enable me know



Curing Agent Pump Gear Mtering Pump