Fuel Diesel Pump in AC220V

Fuel Diesel Pump in AC220V

Model No.: ZYB60-13A
(pump+4m supply hose+manual oil nozzle+120L flowmeter)
 Product introduction:The ZYB sequence oil pump device is utilized for pumping light oils such as diesel or kerosene for cars, building websites, farms or for other fuel run equipment.

CZPT Parameters:

Model ZYB60-13A
CZPT Pump Established pump+4m shipping and delivery hose+handbook oil nozzle+120L flowmeter
Rated Voltage    AC220V or AC110V
Rated Electrical power      550W
Motor Turn Velocity      2800r/min
Pump Circulation Charge (twenty-sixty)L/min
Meter flowrate (20-120)L/min
Suction Elevate 3-5m
Head Raise 5-10m
In-out In BSPT1″,Out BSPT1″
Movement Meter Digit four Digit,Max.9999.nine Liter,
8 Digit Gathered

 
CZPT issue:
Temperature: -25ºC—+55ºC

Relative Humidity: thirty%–90%
Higher Atmospheric Pressure:86Kpa–106Kpa
 Malfunction Prognosis & Resolution:

Typical Troubleshooting
Fault Apperance Major Reason Fault Resolution
Motor does not turn one.The electricity cable is not plugged in one.Verify the electrical cable
two.The motor has jammed two.Change the motor
3.Capacitor failure 3.Replace capacitors
Motor turns, but no oil output one.Suction aspect not submerged in oil one.Verify the oil suction hose/pipe
2.Vanes worn or gear ruined two.Substitute vanes or gear
Abnormal metering or no meter output Computation swing tray has broken Substitute the computation swing tray
Tiny oil-output Plugged strainer Clear the strainer

 

Fuel Diesel Pump in AC220V