Industrial Fire Extinguisher Refilling Station Equipment Dry Chemical Powder

Industrial Fire Extinguisher Refilling Station Equipment   Dry Chemical Powder

Merchandise description:
GFM powder filler is a new solution produced and designed by our manufacturing unit in blend with the attribute of true filling with reference to the advantages of its counterparts at house and abroad. Powder is quickly absorbed into the cylinder to be crammed by vacuum jet present. It is equipped with T3806 bodyweight display of higher precision and MP-T printer. The filling is computerized and quantitative. The residual dust on the filter is cleared by use of the negative stress created by vacuum. As it integrates electronics, electrical device and machinery into one particular entity, labor intensity is reduced and perform environment improved. It is characterised by modest volume, light weight, lower strength usage, simple motion, basic procedure and lengthier service existence. So it is specifically appropriate for powder filling of fireplace extinguisher and also best for other powder filling sector.
 

Fire extinguisher filling machine
Sort Product
Powder filling equipment GFM8-2,GFM16-one,GFM16-1A,GFM16-1B
Co2 filling machine  GTM-B,GTM-D,DGTM-C
H2o filling machine GFM
Nitrogen gas filling device MDG-1.seven

Fireplace extinguisher filling equipment images and technical parameters specifics:
one.GFM8-2 automatic fire extinguisher electricity filling machine

Specs:

All round dimension: 1130X520X1350mm Bodyweight:200Kg

Voltage:380V or 220V      50Hz Electrical power:.55Kw

Filling precision: 1kg<=±0.02

Filling velocity:6-12Kg/min

two.GFM16-A semi automatic fire extinguisher energy filling device

Technical specs:

All round dimensions:350X800X1200mm Bodyweight:110Kg

Voltage:380V or 220V Power:1.1KW

Filling velocity: 5kg /min

Filling precision: 1kg<=±0.02

three.GTM-C fire extinguisher CO2 filling equipment

 

Specs:

A.   This equipment need to have not be heated or cooled, and CO2 can be straight loaded into the fireplace extinguisher kind the huge metal cylinder

B.   The CZPT pressure in the CO2 steel can is three~5Mpa and the filling force is 6~10Mpa.

C.   The filling velocity: one~6Kg/min.

D.   Voltage: 380V&220V

E.    Power: two.7KW.

F: A german plunger pump inside  it

four.NDG1.7 fire extinguisher nitrogen filling machine

Specs:

All round measurement: 585X500X1000mm

Bodyweight:30Kg

Voltage:220V

Energy:100w

Filling stress:one.7Mpa
 

fire extinguisher powder filler benefit:
1. CZPT cleaning: Push the button only, the filler will clear extensively of itself. 
two. Filling continually: After loaded a fire extinguisher, the work need to have not restart the powder outlet, in 5 CZPTs (this time can be modified by consumer), powder will circulation out immediately. 
three. Anti-corrode: CZPT powder storage cylinder. 
four. Two design powder outlet: Powder outlet one# can make filling function significantly straightforward, it avoids to squander time on aim the powder outlet to fire extinguisher cylinder inlet. 
five. Powder recycles function. 
fire extinguisher powder filler Characteristic: 
one. CZPT management whole process: 
Sucking powder from warehouse or other fire extinguisher, automatic filling, cease and cleansing of filter. 
two. Precision: 
The filler is geared up with T3806 digital scale of excellent precision, constituting the controller with electrical elements. Whether you fill a modest cylinder of . 5 kg or a large extinguisher of 35 kg, all you have to do is just to set up the bodyweight to be filled on the electronic scale. When the set-up bodyweight is filled, the device will stop of itself 
three. Quickness: 
Much more than 8kg for each minute. 
25-3- CZPTs for 4kg fire extinguisher 
forty five-50 CZPTs for 8kg fire extinguisher 
Filling variety: Earlier mentioned . 5kg 
four. Economy 
Only one particular worker is necessary to complete whole filling motion, cylinder movement.

five. CZPT Cleaning 
The filler capabilities to cleanse automatically. It will clean once right after filling 1 extinguisher without the use of manual cleaning filter. An computerized change for cleansing is fixed separately. For cleaning you have to push the button only and the filler will clear completely of itself.

6. Air pollution–free 
The filler is put in the filling store while the powder is stored in the warehouse, separating the powder source from the workshop and fully steering clear of the air pollution by dust. Making use of the filler, powder can be effortlessly filled into the fire extinguisher.

Automated filling devices for the dry chemical fire extinguishers is a new product designed and made by our factory in blend with the characteristic of real filling with reference to the positive aspects of its counterparts at residence and overseas. Powder is quickly absorbed into the cylinder to be crammed by vacuum jet present. It is equipped with T3806 fat display of large precision and MP-T printer. The filling is automatic and quantitative. The residual dust on the filter is cleared by use of the adverse stress developed by vacuum. As it integrates electronics, electrical device and equipment into one particular entity, labor depth is lowered and operate surroundings improved. It is characterised by small volume, light bodyweight, decrease power intake, effortless movement, easy procedure and for a longer time service daily life.

Industrial Fire Extinguisher Refilling Station Equipment   Dry Chemical Powder