Can be CZPT large-good quality and minimal-value experimental spray dryer
1. CZPT introduction Mainly relevant to colleges and universities, study institutes and meals and pharmaceutical sector laboratory creation of trace particles of powder, for all options such as emulsions, suspensions with wide-spectrum applicability, suitable for heat-sensitive substances these kinds of as biological items, biological pesticides , Enzyme preparations, and many others., since the material is only sprayed into the mist when the dimension of particles by the substantial temperature, it is only instantaneous warmth, to hold these lively components in the dry following the servicing of its lively elements are not destroyed.
The total device is manufactured of 304 stainless steel and the nozzle is manufactured of 316 stainless steel.
2. CZPT functions
one.CZPT imported nozzle, high efficiency.
two.Color Lcd contact monitor parameters screen: air inlet temperature / outlet temperature / CZPT pace / air volume / go needle frequency.
three.With a nozzle cleaner (through the needle), when the nozzle is blocked, it will instantly obvious the frequency of the needle can be automatically adjusted.
four.Shutdown protection purpose: only want to cease when the shutdown button, the machine in addition to the fan instantly end operating, to guarantee that the device will not be due to misuse (forced off the wind turbine) caused by heating component of the burn.
five.The spray, drying and collection system is made of a transparent, high-good quality, large-borosilicate warmth-resistant glass content to allow the drying procedure to continue in a non-polluting environment.
6.Two fluid spray atomization construction, compact style, no ancillary equipment. The very same time as the above-
7.dry temperature control design using genuine-time handle PID temperature management technologies, so that the complete temperature zone temperature handle precision, heating temperature management precision ± 1 ºC.
eight.In get to preserve the sample pure, outfitted with air inlet filter.
9.The volume of feed can be altered by feed CZPT, the bare minimum sample quantity up to 30ml.
ten.dry concluded powder, the particle dimension is far more uniform, a lot more than ninety five% of the dry powder in the exact same particle size range.
11.For the sticky material, with a nozzle cleaner (by means of the needle), when the nozzle is blocked, it will automatically distinct the frequency of the needle can be automatically adjusted.
3. CZPT parameters&Quotation
Design |
HT-RY1500 |
||
Inlet Temperature |
30 ºC ~400ºC |
||
Outlet Temperature |
thirty ºC ~200ºC |
||
Drinking water Evaporation Capability |
1500mL/H ~ 2000ml/h |
||
Max Inlet Amount |
2000ml/h |
||
Min Inlet Quantity |
50mL |
||
Temperature control accuracy |
±0.5ºC |
||
Common drying time |
.8~1.0S |
||
Energy |
3.8KW /220V(can be customed) |
||
Dimension |
600*800*1400mm |
||
Substance |
CZPT steel casing |
All CZPT metal |
four.Fittings |
||
Dry equipment |
1/set |
|
Air compressor |
1/established |
|
Glass drying room |
1/set |
|
Glass cyclone separator |
1/piece |
Glass sample collection bottle 500ML |
1/piece |
Glass samples accumulate cold traps |
one/piece |
CZPT quality feeding tube |
one.5m |
Spray pistol |
one/piece |
Clamp |
1/established |
PTFE gasket |
one/piece |
three.Solution Photo:
4.Business Certification:
5.Our Personalized