Overview
The liquid ammonia pump human body connects directly with motor entrance flange, and can express the medium minimal temperature fluid with no granule be zero leakage.

The Canned Pump is a centrifugal pump, shut coupled to a Canned Motor in this sort of a way that
There is no dynamic shaft seal, no couplings and no ball bearings. The motor is cooled by the
Pumped liquid and the sleeve sort.
Bearings are lubricated by the identical liquid. This removes the need for external lubrication.
The stator of the driving motor, which is usually three stage squirrel cage induction motor,
Which is hermetically contained in a stator containment that consist of an exterior body tube,
Out board & inboard end plates and the inner cylinder liner. The rotor which is welded on
The shaft, is also encapsulated with a non magnetic liner. Both stator liner (Stator Can) and
Rotor liner (rotor can) are seal welded at both finishes, and does not enable any part of the motor to be
Uncovered to exterior surroundings or inner pumped liquid.

Featurers
1) No shaft seals, no leak paths
two) No buffer pots to sustain
3) No coupling or alignment difficulties
four) Major leak containment shell
five) Proven bearing keep track of detects bearing use before main leak containment shell is contacted by the rotor
six) Dry stator design and sealed junction box terminal plate
7) Managed bearing enviroment, conservation bearing design and hydraulic thrust balancing, prolonged bearing existence