DESCRIPTIONS
DDCY-Q sequence vacuum force solenoid valve, which is mounted on a dedicated mechanical vacuum pump. Mounted in the mechanical vacuum pump inlet, and synchronize the opening and closing of the pump.
When the pump stops functioning or energy offer is all of a sudden interrupted, the valve can rely on the force of atmospheric strain and vacuum valve plate closes immediately shut vacuum method to maintain its vacuum, and the air stuffed by way of the orifice valve into the pump chamber in order to avoid contamination of the vacuum pump oil countercurrent system.
Requirements
| MCZPTL | DN(mm) | Size(mm) | SPECIFICATION | Substance | ||||||||
| D | D1 | H | n-d | LEAK Charge(Pa .L/s) | Open&Shut TIME(s) | Energy(w) | Source | Fat(kg) | VALVE BODY | SEAL | ||
| DDCY-20Q | 20 | sixty five | fifty | 50 | four-M6 | <6.7X10-2 | <3 | 14 | -220V 50Hz | one.3 | CARBON Steel | RUBBER |
| DDCY-25Q | 25 | 70 | fifty five | eighty five | 1.5 | |||||||
| DDCY-32Q | 32 | 78 | sixty four | 95 | 2 | |||||||
| DDCY-40Q | 40 | 85 | 70 | ninety five | 3 | |||||||
| DDCY-50Q | 50 | 110 | ninety | a hundred | four-M8 | three.five | ||||||
| DDCY-65Q | 65 | 125 | a hundred and five | a hundred and ten | five | |||||||
| DDCY-80Q | eighty | one hundred forty five | a hundred twenty five | one hundred twenty | 6.5 | |||||||
| DDCY-100Q | a hundred | a hundred and seventy | 145 | a hundred and forty | eight-M10 | ten | ||||||
| DDCY-125Q | one hundred twenty five | 195 | 170 | a hundred sixty five | fifteen | |||||||
| DDCY-150Q | 150 | 220 | 195 | one hundred ninety | twenty | |||||||
| DDCY-200Q | 200 | 275 | 250 | 240 | twelve-M10 | 30 | ||||||
Applicable working medium: air and non-corrosive gases.
Note: The uper flange on the pressure diffenence with a sealing groove, the reduce flange without sealing groove
| STM | DESCRIPTION | QTY | REMARK |
| 4 | BELT | 5 | * |
| 13 | O-RING | two | * |
| fourteen | SHAFT SEAL | 2 | * |
| 14A | SHAFT SEAL | 3 | * |
| sixteen | Prolonged SHAFT SLEEVE | one | * |
| 17 | O-RING | five | * |
| 18 | BEARING | two | ** |
| 21 | Gasoline BALLAST VALVE | 1 | * |
| twenty five | Quick SHAFT SLEEVE | two | * |
| 29 | O-RING | 1 | * |
| 32 | Important | two | ** |
| 34 | Important | 1 | ** |
| 35 | Crucial | 2 | ** |
| 45 | VACUUM RESERVOIR OIL VALVE | 1 | ** |
| forty six | OIL FILTER Device | 1 | * |
| 51 | O-RING | one | * |
| fifty eight | Center SHAFT SLEEVE | two | * |
| 59 | O-RING | 1 | * |
| sixty three | O-RING | 1 | * |
| 67 | O-RING | 1 | * |
| 87 | O-RING | one | * |
| 88 | O-RING | 1 | * |
| 89 | SOLENIOD VALVE | one | * |
| ninety two | O-RING | 1 | * |
| one hundred | POPPET VALVE | three | * |
| 100C | VALVE CAP | 6 | * |
| 100D | SPRING | eighteen | * |
| 100E | POPPET VALVE | six | * |
| 100F | VALVE DECK | 3 | * |
| 100G | O-RING | three | * |
| 103 | O-RING | two | * |
DESCRIPTIONS
Vacuum bellows for link in between the device and piping, pipe and tubing. It plays damping, disinfection and payment owing to the vacuum bellows exclusive attributes, it is extensively employed in industrial fields of scientific research, aerospace, aviation, petroleum, chemical, pharmaceutical, electronics, electrical, vacuum processing.
SPECIFICATION
| Size | Waveforms | |||
| Φ50 | 3 | six | nine | 12 |
| Φ80 | ||||
| Φ100 | ||||
| Φ150 | ||||
| Φ200 | ||||
| Φ250 | ||||
| Φ300 | ||||
| Φ400 | ||||
| Φ500 | ||||
| Φ600 | ||||
| Φ700 | ||||
| Φ800 | ||||
| Φ900 | ||||
| Φ1000 | ||||
| Φ1200 | ||||
| Φ1400 | ||||
| Φ1600 | ||||
| Φ1800 | ||||
| Φ2000 | ||||
Notice:Vacuum Bellows be devided to loose flanges and without unfastened flange, the dimension, duration and waveforms can also be CZPT in accordance to customer’s needs.
IVF VACUUM PUMP INLET OIL MIST FILTER
CZPT material is stainless metal woven mesh and stainless metal punching hole mesh, which is employed in previous stage dewater in heavy oil combustion program, can also be used for chemical liquid filtration, precision is a hundred um
CZPT element material is stainless metal round microporous mesh, use to the pretreatment and submit-remedy method of electronic, petroleum, chemical, pharmaceutical, meals and other industrial departments. To more purify drinking water high quality which consists of lower suspended impurities (much less than 2 ~ 5 mg/L).
OMF VACUUM PUMP OUTLET OIL MIST FILTER
My business developed OMF series outlet oil mist filter for rotary piston vacuum pumps and rotary vane vacuum pumps. These oil mist filters can filtrate oil mist effectively which discharged by vacuum pumps. Decreasing surroundings air pollution significantly and lowering the oil intake effectively. OMF oil mist filters have by pass valves and exhaust strain display. If exhaust strain is too high, by move valve will be opened instantly for reducing strain. In comparison to other general oil mist filters, OMF oil mist filters are a lot more protected, much more reliable. The outer layer of filter main has removable fabric for replacing or washing when the fabric is soiled, tremendously extending the lifestyle of filter main.
Technical specs
| Model | OMF-40 | OMF-50 | OMF-63 | OMF-80 | OMF-100 | OMF-125 | OMF-150 |
| Outlet Dia (mm) | DN40 | DN50 | DN63 | DN80 | DN100 | DN125 | DN150 |
| Rated Gasoline Flow (L/S) | 30 | 60 | 150 | 220 | 300 | 450 | 600 |
| By Pass Valve Working Pressure (MPa) | Relative Pressure .571 Complete Pressure .125 | ||||||
| Max Discharge Pressure (MPa) | Relative Strain .04 Absolute Pressure .14 | ||||||
| Related Vacuum Pump Model | 2H-15DVA 2H-15DVW H-25DVA H-25DVW | 2H-30DV 2H-45DVA H-50DV H-60DVA | 2H-50DV 2H-70DV 2H-80DV 2H-100DV3 H-70DV H-100DV H-120DV | 2H-100DV 2H-120DV 2H-160DV H-150DV H-160DV H-215DV | 2H-150DV 2H-225DV H-225DV H-300DV | 2H-300DV H-400DV 2H-340 H-450 | 2H-450 H-600DV |
| Net Weight (kg) | 13 | 17 | 23 | 35 | 60 | 80 | 110 |
Benefit
1. Higher vacuum, high exhausting efficiency in medium or substantial vacuum, vast working variety, apparent vitality-preserving final results.
two. Built-in rack, compact construction, little required space.
three. Substantial automation, simple procedure, easy routine maintenance, safe, dependable and resilient managing.
four. To customize a particular pump system as per the specific wants of the finish person.
Application
Commonly used in vacuum coating, vacuum metallurgy, vacuum heat remedy, vacuum drying, vacuum impregnation, vacuum strainer, poly-silicon generation, aerospace simulation and so on.
Sea Port: HangZhou/ZheJiang , China
Regular: CE Mark, Spare Parts Of Higher Amount
Supply: Normally in accordance to our manufacturing unit production schedule, but we can stick to your initial order time
Guarantee: If pump seem top quality issues, totally free replacements of spare parts will be supplied inside one particular calendar year
WE CAN Offer YOU
one. On-time Supply, with Far more Choice
two. Excellent CZPT Support
three. CZPT Vacuum Solutions and Service
4. Samples Available
5. Long CZPT Guarantee
6. CZPT Reaction to Customers’ Opinions in 12 hours
OVERVIEWS OF Manufacturing facility:
Improvement VACUUM Gear CO., LTD
Insert:HangZhou INDZONE, HangZhou, ZHangZhouG, CHINA Computer: 317106
TEL:-576-83598308 FAX:-576-83598309